With 2 galvanic isolated NMEA-Inputs, 12x RS422-Outputs and 2x RS232-Outputs, the VL-SDN Selector switches automatically to the second input if no signal is detected from the first one.
| Typical application: Two GPS (GPS 1 & GPS 2) are both connected to VL-SDN. ➔ If no signal is detected from GPS 1, the VL-SDN immediately switches the input to GPS 2. |
Additionally, 2 Power Inputs are available on the device, with the second one acting as a redundant power source.
Find out more about the outputs available on the VL-SDN module here!
